Blog

Switch all tools OFF before connecting them to a power supply.Disconnect and lockout the power supply before completing any maintenance work tasks or making adjustments.Ensure tools are properly grounded or double-insulated. The grounded equipment must have an approved 3-wire cord with a 3-prong plug. This plug should be plugged in a properly grounded 3-pole outlet.Test all tools for effective grounding with a continuity tester or a Ground Fault Circuit Interrupter (GFCI) before useDo not bypass …

It is important that you follow the manufacturer's instructions with respect to the use of a GFCI. Test permanently wired GFCIs monthly, and portable devices before each use. Press the "test" and "reset" buttons. Plug a "night light" or lamp into the GFCI-protected wall outlet (the light should turn on), then press the "TEST" button on the GFCI. If the GFCI is working properly, the light should go out. If not, have the GFCI repaired or replaced. Press the "RESET" button on the GFCI to restore p …

Inspect Cords and PlugsCheck extension cords and plugs daily. Do not use, and discard if worn or damaged. Have any extension cord that feels more than comfortably warm checked by an electrician.Eliminate Octopus ConnectionsDo not plug several items into one outlet.Pull the plug, not the cord.Do not disconnect power supply by pulling or jerking the cord from the outlet. Pulling the cord causes wear and may cause a shock.Never Break OFF the Third Prong on a PlugReplace broken 3-prong plugs and mak …